KT CR | cable grommets

for the use in cleanrooms, 1 - 35 mm / IP66 / IP68 / UL Type 12/4X*

Cable grommets KT CR small are used with the following cleanroom cable entry components:

In combination with KEL-ER CR cable entry frames the KT CR single-hole grommets enable a sealing of the cables with up to IP66 / IP68 and UL Type 4X*.

The model range KT CR small is designed for cable diameters from 1 to 17 mm. Cable grommets KT CR large accept a wide range of cable diameters from 16 to 35 mm.

When installing the small grommets in multiple rows, the flat sides should be facing each other. This allows the flat sides to match up and provide a secure seal.

The products with article ending .600 are tested and certified for particle emission for cleanroom class 1 according to ISO 14644-1. The materials used for these products have been tested and certified for outgassing according to VOC/SVOC (ISO 14644-8; ISO 16000-6,-9,-11,-25, VDI 2083 sheet 17).

The products with the article ending .601 are tested and certified for particle emission for cleanroom class 1 according to ISO 14644-1.

*4X for indoor use only

Specifications

IP rating (EN 60529) IP54, IP55, IP64, IP65, IP66, IP67, IP68
UL Type (UL 50E) UL Type 12, UL Type 4X*
Flame class UL94-V0, self-extinguishing
Operating temperature -40 C° to 100 C°
Material Elastomer
Properties silicone free, halogen free

Advantages & benefits

  • Enable routing of pre-terminated cables through cable entry frames and split cable glands
  • Available for a large range of cable diameters
  • Greatly increased cable density when using double or quadruple grommets

Product types & sizes

You haven't found anything suitable yet?

Try the ProductFinder

Suitable for:

You might also be interested in the following products