The KEL-FA range is a compact system to route and seal pre-terminated cables as well as conduits or pneumatic hoses utilising KT series grommets. After populating the entry frame with grommets and cables, the cover is put on and the two clamping levers are locked with the lower part by pressing them down. The twist-proof construction of the KEL-FA enables intuitive assembly. Routing and sealing with IP54 / UL Type 12 for cable diameters from 1 to 35 mm.
The KEL-FA frames match exactly the cut-out dimensions for 10-, 16- and 24-pin standard industrial connectors. These KEL-FA frames can either be screw mounted or simply snapped into the KEL-SNAP frame.
| IP rating (EN 60529) | IP54 |
| UL Type (UL 50E) | UL Type 12 |
| Flame class | UL94-V0, self-extinguishing |
| Operating temperature | -40 C° to 140 C° |
| Material | Polyamide |
| Mounting options | Screw type mounting, Snap-in with KEL-SNAP |
| Properties | UV-resistant, silicone free, anti-corrosive, halogen free |
| Part No. | 55241 |
| EAN | 4251269324796 |
| Package quantity | 10 |
| Mounting options | Screw type mounting, Snap-in with KEL-SNAP |
| For max. no. of cables | 40 |
| Max. cable diameter | 15 mm |
| Length | 147 mm |
| Width | 62 mm |
| Height | 22 mm |
| Mounting height | 22 mm |
| Cut-out size | 112 × 36 mm |
| No. of screw holes | 4 |
| Diam. of screw holes | 6 mm |
| Suitable for grommets | 10 x KT small |
| Part No. | 55247 |
| EAN | 4251269324802 |
| Package quantity | 10 |
| Mounting options | Screw type mounting, Snap-in with KEL-SNAP |
| For max. no. of cables | 25 |
| Max. cable diameter | 35 mm |
| Length | 147 mm |
| Width | 62 mm |
| Height | 22 mm |
| Mounting height | 22 mm |
| Cut-out size | 112 × 36 mm |
| No. of screw holes | 4 |
| Diam. of screw holes | 6 mm |
| Suitable for grommets | 6 x KT small, 1 x KT large |
| Part No. | 55244 |
| EAN | 4251269324819 |
| Package quantity | 10 |
| Mounting options | Screw type mounting, Snap-in with KEL-SNAP |
| For max. no. of cables | 6 |
| Max. cable diameter | 35 mm |
| Length | 147 mm |
| Width | 62 mm |
| Height | 22 mm |
| Mounting height | 22 mm |
| Cut-out size | 112 × 36 mm |
| No. of screw holes | 4 |
| Diam. of screw holes | 6 mm |
| Suitable for grommets | 2 x KT small, 2 x KT large |
| Part No. | 55168 |
| EAN | 4251269324826 |
| Package quantity | 10 |
| Mounting options | Screw type mounting, Snap-in with KEL-SNAP |
| For max. no. of cables | 32 |
| Max. cable diameter | 15 mm |
| Length | 120 mm |
| Width | 62 mm |
| Height | 22 mm |
| Mounting height | 22 mm |
| Cut-out size | 86 × 36 mm |
| No. of screw holes | 4 |
| Diam. of screw holes | 6 mm |
| Suitable for grommets | 8 x KT small |
| Part No. | 55165 |
| EAN | 4251269324833 |
| Package quantity | 10 |
| Mounting options | Screw type mounting, Snap-in with KEL-SNAP |
| For max. no. of cables | 17 |
| Max. cable diameter | 35 mm |
| Length | 120 mm |
| Width | 62 mm |
| Height | 22 mm |
| Mounting height | 22 mm |
| Cut-out size | 86 × 36 mm |
| No. of screw holes | 4 |
| Diam. of screw holes | 6 mm |
| Suitable for grommets | 4 x KT small, 1 x KT large |
| Part No. | 55162 |
| EAN | 4251269324840 |
| Package quantity | 10 |
| Mounting options | Screw type mounting, Snap-in with KEL-SNAP |
| For max. no. of cables | 2 |
| Max. cable diameter | 35 mm |
| Length | 120 mm |
| Width | 62 mm |
| Height | 22 mm |
| Mounting height | 22 mm |
| Cut-out size | 86 × 36 mm |
| No. of screw holes | 4 |
| Diam. of screw holes | 6 mm |
| Suitable for grommets | 2 x KT large |
| Part No. | 55216 |
| EAN | 4251269324857 |
| Package quantity | 10 |
| Mounting options | Screw type mounting, Snap-in with KEL-SNAP |
| For max. no. of cables | 24 |
| Max. cable diameter | 15 mm |
| Length | 100 mm |
| Width | 62 mm |
| Height | 22 mm |
| Mounting height | 22 mm |
| Cut-out size | 65 × 36 mm |
| No. of screw holes | 4 |
| Diam. of screw holes | 6 mm |
| Suitable for grommets | 6 x KT small |
| Part No. | 55212 |
| EAN | 4251269324864 |
| Package quantity | 10 |
| Mounting options | Screw type mounting, Snap-in with KEL-SNAP |
| For max. no. of cables | 9 |
| Max. cable diameter | 35 mm |
| Length | 100 mm |
| Width | 62 mm |
| Height | 22 mm |
| Mounting height | 22 mm |
| Cut-out size | 65 × 36 mm |
| No. of screw holes | 4 |
| Diam. of screw holes | 6 mm |
| Suitable for grommets | 2 x KT small, 1 x KT large |
Convince yourself of the simple and
time-saving assembly of our products.
Watch the assembly video!
Always find the right size and the right cable grommets for your cable entry!
Tool-free snap-in mounting frames for KEL, KEL-U and KEL-QUICK.
Split cable grommets for diameters of 1 to 17 and 13 - 35 mm. Suitable for KEL cable entry frames and KVT cable glands.
Split cable grommets for diameters of 1 to 17 and 13 - 35 mm. Suitable for KEL cable entry frames and KVT cable glands. Higher chemical resistance.
Split cable grommets for diameters of 1 to 8 mm as well as for special cables. Suitable for KEL cable entry frames and KVT cable glands.
Split cable grommets for diameters of 1 to 8 mm as well as for special cables. Suitable for KEL cable entry frames and KVT cable glands. Higher chemical resistance.
Split cable grommets for diameters 4 - 29 mm. Suitable for KEL cable entry frames and KVT cable glands.
Split cable grommets for diameters 4 - 29 mm. Suitable for KEL cable entry frames and KVT cable glands.
Flexible pyramid shaped cable grommet with multi range for various cable diameters 3 - 26 mm. Enhanced strain relief possible via cable ties.
Flexible pyramid shaped cable grommet with multi range for various cable diameters 3 - 26 mm. Enhanced strain relief possible via cable ties. Higher chemical resistance.
Flexible multi range cable grommets with peelable membrane rings for various cable diameters 4 - 28 mm.
Flexible multi range cable grommets for various cable diameters 2.5 - 33 mm.
Multi membrane cable grommets based on the KT grommets for routing of several standard cables with varying diameters.
Adapter grommets with inner thread based on KT cable grommets.
Blank adapter grommet based on KT grommets for custom interface solutions (e.g. screw mounted hybrid connectors).
Adapter grommet with protection cover based on KT cable grommets for snap-in mounting of Keystone jacks.
Adapter grommet based on KT cable grommets for snap-in mounting of Keystone jacks.
Adapter grommet based on KT cable grommets for square flanges with the dimensions 19.8 x 19.8 mm (M23).
Adapter grommet based on KT cable grommets for PushPull connection technology.
EMC cable collectors with EMI shielding function for cable entry systems - for use with cable shield clamps PFS.
EMC cable collectors with EMI shielding function for cable entry systems - with integrated strain relief.
Rectangular & square knockout punches for heavy multi-pin industrial connectors and many icotek cable entry components.
Fire penetration seals for certified icotek BS cable entry components, approved for use in railway technology.
Modular gland plate system for mounting cable entry components in enclosure bases, roofs and divider panels. Suitable for enclosure base plate KDR-BMP.
Flange plates for mounting cable entry components on compact enclosures, terminal boxes or bus enclosures by Rittal and Fibox.
KT grommet based cable entry frames for standard cut-outs of heavy industrial connectors. Available as single or double row version.
With the distribution box, centrally routed cables (with and without connectors) can be distributed 360° in all desired directions.
Classic KT grommet based cable entry frames for standard cut-outs of heavy industrial connectors. Also available as multi-row versions.
KT grommet based flange enclosure for routing preassembled cables in a 90° angle to the enclosure wall. Available as single or double row version.
Suitable for cut-outs of heavy industrial connectors. Mounting via screws or expanding rivets.
QT grommet based cable entry plate made of elastomer for cables with or without connectors. Snap-in mounting.
KT grommet based split cable gland for preassembled cables with metric thread sizes M20 / M25 / M32 / M40 / M50 / M63.
Cable entry plate with high cable density and certified protection up to IP66 / UL Type 12. Available in various sizes.
Strain relief and cable routing plates for snap-on assembly on 35 mm top hat DIN rails and C section rails C30.
EMC cable clamps for direct mounting via screws, e.g. on metal sheets.
